{"product_id":"tovcol-wet-dry","title":"TOVCOL WET\u0026DRY","description":"\u003cp\u003eTOVCOL WET\u0026amp;DRY by Tover is a high performance, water based acrylic flooring adhesive for resilient and textile floor coverings. Suitable for LVT, SPC, vinyl, rubber, carpet, linoleum and cork in sheets or tiles, its solvent free formula combines good initial tack with a long open time for flexible professional installation.\u003c\/p\u003e\u003cp\u003eDesigned for indoor floors and walls, this versatile adhesive is suitable for residential, commercial and industrial environments, including projects with underfloor heating. It supports traditional wet laying and the double drop method, as well as pressure sensitive installation of dimensionally stable coverings on suitable non absorbent substrates, subject to the manufacturer's preparation instructions.\u003c\/p\u003e\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePack size: 12kg bucket\u003c\/li\u003e\n\u003cli\u003eManufacturer: Tover\u003c\/li\u003e\n\u003cli\u003eAdhesive type: Acrylic adhesive in water dispersion\u003c\/li\u003e\n\u003cli\u003eSuitable coverings: LVT, SPC, vinyl, rubber, textile flooring, carpet, linoleum and cork\u003c\/li\u003e\n\u003cli\u003eApplication: Indoor floors and walls\u003c\/li\u003e\n\u003cli\u003eUnderfloor heating: Suitable\u003c\/li\u003e\n\u003cli\u003eTraditional wet installation waiting time: 10–20 minutes\u003c\/li\u003e\n\u003cli\u003eDry installation waiting time: 30 minutes–12 hours\u003c\/li\u003e\n\u003cli\u003eOpen time: 40–50 minutes\u003c\/li\u003e\n\u003cli\u003eLight foot traffic: After 4–6 hours\u003c\/li\u003e\n\u003cli\u003eReady for use: After 24–48 hours\u003c\/li\u003e\n\u003cli\u003eApplication temperature: +10°C to +35°C\u003c\/li\u003e\n\u003cli\u003eService temperature when fully hardened: −20°C to +50°C\u003c\/li\u003e\n\u003cli\u003eStorage life: 12 months in unopened original packaging, stored above +10°C and protected from frost\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Features and Benefits\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBroad compatibility with resilient and textile floor coverings makes it a versatile choice for professional flooring projects.\u003c\/li\u003e\n\u003cli\u003eGood initial tack helps establish contact between the adhesive and the covering.\u003c\/li\u003e\n\u003cli\u003eA long open time provides flexibility during installation.\u003c\/li\u003e\n\u003cli\u003eSuitable for underfloor heating and areas where coverings are exposed to high temperatures, within the stated service temperature range.\u003c\/li\u003e\n\u003cli\u003eSupports wet, double drop and pressure sensitive laying methods where appropriate for the covering and substrate.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAdhesive Consumption\u003c\/h2\u003e\u003cp\u003eConsumption varies with the substrate, floor covering and trowel used:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTKB A1 or A2 trowel: Approximately 200–300g\/m²\u003c\/li\u003e\n\u003cli\u003eTKB B1 trowel: Approximately 300–350g\/m²\u003c\/li\u003e\n\u003cli\u003eTKB B2 trowel: Approximately 350–450g\/m²\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation and Subfloor Preparation\u003c\/h2\u003e\u003cp\u003eSubstrates must be level, sound, clean and dry, with no loose material or rising moisture. Acclimatise the adhesive, covering and subfloor to the same temperature before installation. Follow the technical datasheet for moisture limits, priming and levelling requirements. The datasheet specifies at least 2mm of Rockfloor F10 levelling compound for non absorbent subfloors; consult its preparation instructions alongside the guidance for pressure sensitive laying.\u003c\/p\u003e\u003cp\u003eMix well before use and apply evenly with a suitable trowel. For traditional wet laying, allow a waiting time of 10–20 minutes, then lay and roll the covering, checking that adhesive transfers to its backing. For pressure sensitive laying, allow the adhesive to become semi transparent and remain tacky without transferring to the fingers before fitting and rolling the covering. Always follow the flooring manufacturer's installation instructions.\u003c\/p\u003e\u003ch2\u003eImportant Use and Storage Information\u003c\/h2\u003e\u003cp\u003eFor professional use only. Technical timings are indicative and based on 20°C and 60% relative humidity; actual times vary with substrate absorbency, temperature and humidity. Do not use in permanently humid environments or in direct contact with water. Protect from frost. Clean tools with water immediately after use, or with Stripcoll once the adhesive has dried. Consult the technical datasheet, product label and safety data sheet before use.\u003c\/p\u003e","brand":"Tover","offers":[{"title":"Default Title","offer_id":51842333671670,"sku":null,"price":99.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0418\/4568\/6426\/files\/TOVCOL_WET_DRY.jpg?v=1791906829","url":"https:\/\/storiesflooring.co.uk\/products\/tovcol-wet-dry","provider":"Stories Flooring","version":"1.0","type":"link"}