The Karndean Van Gogh Cool Grey Oak VGW113T requires a glue down installation method. Glue down luxury vinyl tile installation is easy to do by yourself. While professional installation will guarantee the best-quality finish, you can still achieve aesthetically pleasing results via the DIY method.
Each luxury vinyl floor has its own installation instructions provided by the manufacturer. However, there are some general guidelines you can follow. Here, you'll discover the basics of glue down LVT installation.
Choosing the right adhesive
It's important to ensure you're using the right adhesive when gluing down luxury vinyl tiles. This will ensure a strong, long-lasting bond. You will find information regarding the type of adhesive you'll need in the Karndean Van Gogh Cool Grey Oak VGW113T manufacturer guidelines.
There are a number of factors to consider when choosing LVT adhesive. The room you'll be installing the floor into plays a role in the type of adhesive you might need. For example, if you'll be installing it in the bathroom, the adhesive is going to need to be moisture resistant. If you'll be installing it in a room that tends to get quite hot, you'll need a high-temperature adhesive.
If in doubt, refer to the manufacturer guidelines, or contact our friendly team who will be able to advise you of the best adhesive to suit your installation.
Preparing for installation
You will need to carry out a number of preparation steps before you install the floor. Firstly, you'll want to acclimatise the luxury vinyl tiles for a period of around 48 hours. Ideally this should be done in a room with a similar temperature to the one you're installing it in.
While you're waiting for the floor to be acclimatised, you can start preparing the subfloor. You'll need to make sure it's clean and level. Vinyl can be installed on most subfloor materials, but it does need to be flat and clean beforehand. If you're working with a concrete floor, it should be totally cured and dry for at least six weeks prior to the installation.
It is also a good idea to check the moisture levels of the subfloor. If it has a high-moisture content, you can use a drying screed, along with a moisture resistant adhesive to protect the LVT.
Once you're ready to install your new floor, you can follow the general steps below:
Step 1: Begin in the centre of the room
With glue down LVT installation, it's best to start installing the floor in the centre of the room. Use a chalk line to mark the subfloor where the first line will begin. You can lay out the tiles first to check whether you'll need to cut them near the walls and around any pipework in the room.
Once you have prepared for where the tiles will go and cut them to size if required, you can begin adding the adhesive.
Step 2: Apply the adhesive
It's really important to follow the instructions on your chosen adhesive. Apply it where the first and second rows will be fitted and ensure you lay the tiles down before it sets. Never apply more adhesive than you can use in the space it takes to dry.
Be sure to spread the adhesive evenly with a trowel over the designated area. Then, place the tiles for the first and second rows down securely.
Step 3: Use a hand roller to secure the floor
After you've laid the first tiles, use a hand roller to securely bond them to the adhesive. This will ensure they are adequately bonded, and they won't pop up during the rest of the installation.
Step 4: Use a damp cloth to wipe away excess glue
As you're laying the planks, you may find some of the adhesive gets onto the tiles. If it does ooze out onto them, use a damp cloth to simply wipe it away. Don't allow the adhesive to set on top of the tiles.
Step 5: Use a floor roller to ensure a great bond
Once the first and second lines have been completed, use a floor roller to further bond the tiles to the adhesive. Ideally, the roller should weigh between 50kg to 65kg. Be sure to roll in different directions for best results.
Once the first and second lines have been installed, you can install the rest of the floor repeating the steps above.
Glue down installation does take a little longer than click installation. However, it also leaves you with a strong, stable floor.
Important: We highly recommend contacting the manufacturer of the floor to receive an official installation guide. Failure to follow manufacturer guidelines could void the warranty.